AUXILIARY MENU
QC40198/QC40196 User Manual
73 |
P a g e
Figure 6-9
6.3.6 Activate Pattern Function
In
X419H419H419H
Figure 6-6
X
input mode value in the No. blank, and click pattern button.
6.3.7 Border Setup
In
X420H420H420H
Figure 6-5
X
, click border button. The interface is shown in
X421H 421H 421H
Figure 6-10
X
.
Please go to
X422H 422H 422H
Figure 6-2
X
, use direction arrows to select camera left limit, and then please go to
X423H 423H423H
Figure 6-10
X
and
click left limit button
Repeat the above procedureto set right limit.
Figure 6-10
6.3.8 Activate Border Function
In
X424H424H424H
Figure 6-6
X
, click auto scan button, the system begins auto scan. Correspondingly, the auto scan button changes
to stop button.
Click stop button to terminate scan operation.
6.3.9 Flip
In
X425H425H425H
Figure 6-6
X
, click page switch button, you will see the interface shown below. See
X426H 426H 426H
Figure 6-11
X
. Here you can
set auxiliary function.
Click page switch button again, system goes back to
X427H427H427H
Figure 6-2
X
.
Figure 6-11
X
