4
INSTALLATION AND OPERATION MANUAL FOR CIGS SOLAR MODULES Q-CELLS SE - EUROPE - EUROPE
2 PRODUCT DESCRIPTION Q.SMART
FIGURE 1:
Exterior dimensions (in mm) and components for Q.SMART UF, Q.SMART UF L and Q.SMART
TECHNICAL DATA
(you can find additional data in the respectively valid data sheets at www.q-cells.com)
PRODUCT LINE
Q.SMART UF (SL1)
Q.SMART UF L (SL2)
Q.SMART (SL1-F)
Type
unframed
unframed
framed
Area [m²]
0.75
0.94
0.76
Weight [kg]
13.2
16.5
14.5
Max. system voltage V
sys
[V]
1,000
1,000
1,000
Max. reverse current l
R
[A]
4
4
4
Junction box
Protection class IP 65 with bypass
diode
Protection class IP 65 with bypass
diode
Protection class IP 65 with bypass
diode
Connector
Multicontact MC4 (safe against accidental contact, reverse-polarity protected, resistant against UV radiation
and against temperatures from -40 °C to +90°C, designed for 1000 VDC and 22 A (nominal power dependent
from surrounding temperature)
Flammability rating
C
C
C
Snow load [Pa]
2,400
2,400
5,400
Wind load [Pa]
2,400
2,400
2,400
Certificates
All modules: CE, IEC 61646 (Ed. 2), IEC 61730 (Ed. 1) application class A
Q.SMART UF
Q.SMART UF L
Q.SMART
Components (rear view)
1 Junction box
2 Product label
3 Connection cables (+) 855
+30 / -0
, (-) 735
+30 / -0
mm
4 Connectors (with + and - polarity)
5 Grounding points (only Q.SMART)
6 Drainage holes (only Q.SMART)
7 Frame (only Q.SMART)
7
6
6
6
6
5
5
4
2
1
3
4
2
1
3
4
2
1
3
FIGURE 2A:
Module label of Q.SMART & Q.SMART UF
*STC: 1000 W/m², 25°C, AM 1.5 Spectrum. Data given are rated (nominal) values.
See the Installation and Operating Manual by Q-Cells for further information on ap-
proved installation and use of this product.
Warning: ElEctrical Hazard
Do not disconnect under load
Q.SMart UF l 100
PrOdUct
Field wiring: Copper only, 14 AWG min.
Insulated for 90º C min.
Fire Rating Class C
Safety Class ll
Series Fuse: 4 A
nominal Power (+5W/-0W)
Short circuit current
Open circuit Voltage
current at Maximum Power
Voltage at Maximum Power
Maximum System Voltage
1000 V (iEc) / 600 V (cSa/Ul)
PErFOrMancE at Standard tESt cOnditiOnS*
P
max
i
sc
V
oc
i
mp
V
mp
[W]
[A]
[V]
[A]
[V]
Made in Germany
tHiS MOdUlE iS EnErgizEd BY
Manufactured for Q-cEllS SE
Bitterfeld-Wolfen, Germany
EMail [email protected]
WEB www.q-cells.com
®
US
C
• Certified UL1703
• No 244748
• Master Contract: 244748
FIGURE 2B:
Module label of Q.SMART UF L
Q.SMART UF L 115
PERFORMANCE AT STANDARD TEST CONDITIONS*
Nominal Power
(+5 W)
Measurement accuracy Pmpp*: ± 3 %
P
mpp
[W]
115
Short circuit current
I
sc
[A]
1.69
Open circuit voltage
V
oc
[V]
95.1
Current at maximum power
I
mpp
[A]
1.54
Voltage at maximum power
V
mpp
[V]
74.7
Maximum system voltage
V
sys
[V]
1000 (IEC)
600 (CSA / UL)
Weight
M
[kg]
16.5
*STC: 1000 W/m², 25 °C, AM 1.5 Spectrum. Data given are rated (nominal) values.
Certified
UL 1703
(No 251746)
Series Fuse: 4 A
Field Wiring:
Copper only, 14 AWG min.
Insulated for 90 º C min.
Fire Rating Class C
DANGER!
Risk of electric shock!
DO NOT connect or
disconnect plug contacts
while system is under
load current. Refer to the
Installation and Operation
Manual before installing,
operating or servicing
this unit.
49209 G1.3
EMAIL [email protected]
WEB
www.q-cells.com
ENGINEERED, DESIGNED, MANUFACTURED AND QUALITY TESTED BY Q-CELLS SE.
Made in Germany
ENGINEERED, DESIGNED AND QUALITY TESTED BY Q-CELLS SE IN GERMANY
