![background image](http://html1.mh-extra.com/html/q-cells/q-smart-series/q-smart-series_installation-and-operation-manual_3070248002.webp)
2
1
INTRODUCTION
PAGE 3
2
PRODUCT DESCRIPTION
PAGE 4
3
SAFETY INSTRUCTIONS
PAGE 5
3.1 TRANSPORT AND STORAGE
PAGE 5
4
AREA OF USAGE AND INSTALLATION LOCATION
PAGE 6
5
LAYOUT, MOUNTING AND INSTALLATION
PAGE 7
5.1 MOUNTING LAYOUTS
PAGE 8
5.2 MECHANICAL MOUNTING - UNFRAMED MODULES
PAGE 10
5.3 MECHANICAL MOUNTING - FRAMED MODULES
PAGE 11
5.4 ELECTRICAL LAYOUT
PAGE 12
5.5 GROUNDING
PAGE 13
5.6 ELECTRICAL INSTALLATION
PAGE 15
6
TROUBLESHOOTING
PAGE 15
7
CLEANING AND MAINTENANCE
PAGE 16
8
DECOMMISSIONING AND RECYCLING
PAGE 16
9
CONTACT
PAGE 17
10
APPENDIX - APPLICATION NOTE GROUNDING
PAGE 18
Technical parameters and design are subject to change. The data sheets and customer information valid at the point in time when
the relevant module was manufactured apply for the carrying out of installation, mounting or maintenance work on the solar modules.
DOCUMENT REVISION 3.0
This document applies for Europe for the following as of April 2012:
Q.SMART of product revision G1.3 and higher. For the solar modules up to product revision G1.2, please refer to the manual
„QCells_Installation and Operation Manual_CIGS Module_G1.0 - G1.2_2011-05_Rev07_EN“.
INSTALLATION AND OPERATION MANUAL FOR CIGS SOLAR MODULES Q-CELLS SE - EUROPE