On the right side of the window in the block configuration
are available in the following keys:
Send configuration to
Px144
(allows you to send pre-programmed settings for the
driver),
Read configuration from Px144
(driver settings for
downloading applications),
Save configuration to file
(retain
the settings in the file. cfg)
Load File
(opens previously
saved configuration file) and
Clear configuration
(present
loads, "empty" configuration).
Below are some keys to choose a mode:
Live
(every
change in settings scenes during programming can be
seen Live) and the
Normal
mode (when the driver does not
interrupt the programming work so far.) Additionally there is
available
Reset Px144
button, which restarts the driver,
useful for example after changing the relevant settings.
6
5.2. CONTROLLER SETTINGS
5.2.1. Inputs Settings
In the
Settings / Inputs
tab each of the eight control inputs, we can declare as Normally open -
N/O
(impulse sent to the input will cause the closure of the circuit), Normally Closed -
N/C
(impulse will
open circuit) or unused -
N/U
(input will be cut off).
To define the control input, double-click on the selected entry in the
Mode
column and set the
menu to the desired state.
In the first tab of the main settings, we can assign specific actions to each of the 8 inputs and 64
control buttons on the remote. In addition, we can define the basic parameters of the controller
PX144.
Содержание PX144
Страница 1: ...MANUAL Mini Light Controller PX144 R ...
