A program to use the controller from your PC so you can easily program the device to define the
scene, and programs and set parameters for the driver. The combination of the controller to the
computer via a USB connection.
The application is available in two languages - Polish and English. Other language versions can
be supplied on request.
The software can be run on PC computers running Microsoft Windows 98 SE, 2000, XP or later.
Application and its updates can be downloaded for free from the
website.
http://www.pxm.pl
After installing the software you should run the application, and then connect the controller with a
PC via a USB cable. During the initial connection your computer should execute a standard
procedure for installing a new device in the system. You need to indicate the location of the driver,
that has appeared at the end of the installation PxLight144 software. Connection will be
established after selecting the
Connect
button on the right side Px144 program window. You will
see the status of
"Connected"
and the serial number and firmware version read from the
controller.
NOTE:
To program most of the parameters is not necessary connection the driver - you can save
settings to a file.cfg (see section 5.4 of this manual), and after connecting the module to a
computer to send the configuration to the device.
5. DRIVER PC SOFTWARE
5.1. CONNECTION OF THE DRIVER WITH A PC
5
Содержание PX144
Страница 1: ...MANUAL Mini Light Controller PX144 R ...
