PXM PX144, Руководство пользователя

Страница: 3 / 19

1. GENERAL DESCRIPTION
2. SAFETY CONDITIONS
Driver PX144 Mini Light Controller is powered with safe voltage 12 - 24V, but during the
installation and use you should observe the following safety rules:
1. The device can be connected to supply 12-24 V DC current-carrying capacity in accordance
with technical data.
2. All wires must be protected against mechanical and thermal damage.
3. In case of failure of any of the cables must be replaced with a conductor with the same
technical data and certificates.
4. For connecting DMX use only a shielded cable.
5. All repairs, or connection of the device to a DMX signal can be performed only with the power
off.
6. It is essential to protect the PX144 from contact with water or other liquids.
7. Avoid violent shocks, especially falls.
8. Do not operate the equipment in areas with humidity above 90%.
9. Do not use in rooms with temperatures below 2 ° C or higher than 40 ° C.
10. For cleaning use only a slightly damp cloth.
PX144 Mini Light Controller is a controller of dynamic architectural and decorative lighting that
allows you to control complex lighting systems. For communication with the other devices it has 8
inputs on / off, input the remote control code transmitting wireless RC-5 and a USB port built-in.
The PX144 has a standard DMX-512 output and OC rated at 1.5 A per channel, allowing direct
control of LEDs. RGB LED visible on the casing PX144 allows direct viewing of the selected color
of light in three output channels.
The device is designed to control both fast and slow changes in lighting, and is also perfectly
suited to control all of the intelligent devices.
PLC programming can be made on the PC thanks to the software running in a Windows
environment. PX144 memory allows you to save 16 scenes with a certain brightness, time of
entry, duration, and the eight programs. Moreover, Mini Light Controller has built a special stage,
which can be freely adjusted on an by the user, for example via remote control without need for
PC connection.
Control function can also be done from the other devices (which may be eg motion detectors,
switches, dusk or conventional keyboards), or the remote control. PX144 allows you to define the
16 scenes and 8 programs, consisting of a maximum of 16 steps each.
1