PXM PX144, Руководство пользователя

Страница: 12 / 19

10
5.2.3.1. Special Scene
5.2.3.2. Remote control Address
In the Special Scene, we can define the parameters of additional scenes, which is not "rigid"
programmed, it can keep free to regulate the light intensity at each of the three output channels,
for example via remote control, without requiring PC connection. You can edite it using the keys or
the remote control buttons to access the action scene is a special scene Load. Direct preview of
the special stage and its modification is also possible on LED "X".
Using sliders, you can easily set the initial brightness of each channel: R (red), G (green) and B
(blue). Special Scene, after booting, the light brightness, as defined here. In addition, we can set
the extent to which the special scene of output channels to appear (note that it occupies three
consecutive channels, respectively R, G and B) and set the time after which it reaches defined by
us (using sliders), brightness - maximum value of 1 hour, 49 minutes and 13, 4 seconds.
In the above example values ​ ​ for each color are sequentially: R - 255 G - 152 B - 32, which
gives the resultant color orange. Thus, the effects of components of each color will light up the
DMX channels from 27 to 32 (channels 27 and 30 are responsible for the color red, 28 and 31 -
green, 29 and 32 - blue) and brightening with time of 2 minutes.
Remote Address field is responsible for setting the device address RCU. Read form controller
button allows to find out the address of the remote control which is stored in the memory of
PX144. The address can be obtained directly from the remote control by pressing the remote
control download and then pressing any button on the remote control. Obtained in this way can be
sent to the address PX144 ( Send button).
NOTE: Keep in mind that the driver is able to communicate with remote controllers operating
exclusively in the code RC-5.