Spectra UV
Revision D
/
January 2022
Page 32 of 47
1.
133B
The screen displays the
Target Recipe Width
. If the width value is known, press the
value to manually enter the width setpoint. A keypad will be shown.
•
134B
Enter the necessary value. Select “
Save
” to keep and use the new value.
2.
135B
If the width value is unknown, press the arrows to use the
Auto Adjust Conveyor
Width
. This will jog the conveyor in a negative or positive direction.
3.
136B
Once the target recipe width is correct, press the
wrench icon
to set the target
recipe width to the
Current Conveyor Width
.
435B
Note: The clear board sequence will not run prior to the jog.
436B
Note: The conveyor width setpoint will not update during the manual jog.
275B
Use the
+ -
Page
icons or the F2 and F4 keys to scroll through the Recipes. The Recipe
name is shown at the top of the screen.
Rename Recipe
1.
137B
Use the arrows on the screen or the “
F1
” and “
ESC
” button to scroll to the Setup-
Rename Recipe screen.
26B
Figure 26: Setup-Rename Recipe
2.
138B
Use the
+ - Page
icons or the F2 and F4 keys to scroll through the Recipe names. You
can have a maximum of 30 Recipes.
3.
139B
Select the name you want to change.
4.
140B
The keyboard will be shown, type the new name and select enter. The new name will
be saved. Recipe names are limited to 15 characters.
