USING THE SYSTEM
THE OPERATION PRINCIPLES OF THE CENTRAL
VACUUM CLEANER
When the user connects into the system by con-
necting the suction hose to the wall outlet, an elec-
tronic signal from the wall outlet is sent to the cent-
ral unit to start the system. The central unit starts,
and the vacuum created by the system causes suc-
tion in the pipings.
The central unit stays on, until the hose is pulled out
from the suction outlet. The vacuum cleaner can be
equipped with a hose featuring a handle switch to
start the vacuum.
1
Vacuuming construction or
gypsum dust
is strictly forbidden
without a pre-separator.
!
Pre-separator
2
Wealt box
Puzer Central Vacuum Cleaner is easy to use. If
you are using a suction hose with a handle switch
feature, push the hose to the suction inlet as shown
in the image (
1
). Now you can start and stop the
system with the handle of the suction hose. If you
are using a suction hose without a handle switch
feature, the system starts when you connect the
suction hose to the suction inlet. The central vac-
uum cleaner is designed for traditional vacuuming
of household dust and litter. When vacuuming an
area that is very dusty or wet, a pre-separator must
be used. (
2
).
5
