Puxing PX-568 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 21

Puxing PX-568 Скачать руководство пользователя страница 9

●

on-site alarm

Press the emergency call button, radio sounds alarm tone, while sending the alarm
tone and ANI personal identification code to your partner, press [PTT] key to cancel
the alarm.

Spread frequency by manual

Hold on FUN+SIDE KEY 4 and turn on the radio at the same time, the display will
show”SELF” then input the password “5858”.
The display will show the minimum frequency and maximum frequency.
Input the frequency you need by keypad and press ENT key to confirm.

FM RADIO function

This radio has a FM radio function.
1)Press [FUN] key the display will show “F” icon, press the side key 3 (predefined as
FM radio) again to enable and disable the FM radio.
Under FM radio mode ,you can use the keypad to input the frequency of the station
you need. Turn the channel switch clockwise, the frequency or channel will rise; turn
the channel switch counterclockwise, the frequency or channel will fall, the step is
50K/100K.
2)FM radio mode switch: Press [VFO/MR] key then press the keypad to enter the FM
radio station you stored.
3)FM radio scan: Press SIDE KEY 3 the FM radio frequency will rise, press SIDE
KEY 4 the FM radio frequency will fall. It will stop scan and show the current
frequency you scan when the radio receive a signal.

HOT KEYS

FUN+1SCAN=enter the channel scan
FUN+2PRI=enter the priority channel scan
FUN+3VOX=enter the VOX sensitivity setting
FUN+4CODE=enter the RX&TX CTCSS/DCS setting
FUN+5SQL=enter the SQL setting
FUN+6SCR=enter the scrambler on/off setting
FUN+7LED=enter backlight on/off setting
FUN+8BEEP=enter the beep on/off setting
FUN+9SET=enter the menu function
FUN+0ANI= enter the ANI code setting
FUN+VFO/MR= enter the channel store setting
FUN+ENT= enter the keypad lock

Function key FUN

«
...
7
8
9
10
11
...
»

Содержание PX-568






















Отзывы:

Нет отзывов