Puxing PX-568 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 21

Puxing PX-568 Скачать руководство пользователя страница 8

●

Mode Selection

Press ENTER key and turn on the radio at the same time. You can switch between
channel mode and frequency mode.
On frequency mode press VFO/MR key, you can switch between frequency mode and
“Memory mode+Frequency mode”(VFO) mode.

Talk Around

Talk around allows you to communicate directly with other radios without the
repeater. When using talk around, the transmitting frequency is same with
receive frequency. The CTCSS code is also same.

●

Storage

In frequency mode, select the frequency and other parameters (such as CTCSS, DCS,
repeater shift, etc.). Press [FUN] key and then press [VFO / MR] key, the screen
displays "F" icon and the channel number flashing in the upper right corner ( If the
channel has already stored frequency, then the channel number will not flashing), use
the encoder to select the channel you needed, press the [VFO / MR] key to complete
the channel storage and returns to the frequency mode.

Delete

1. Delete one store channel

On channel mode or frequency mode, turn off the power.
Hold on the VFO/MR key and turn on the power at the same time. The display will
show “

DEL001

?” and the channel number you want to delete. Turn the

Encoder

knob or select the channel to delete. Press ENT key the display will show “

YES?

001

” ; press ENT key again to confirm. If you don’t want to delete it, just press

VFO/MR key. Repeat all the operation to delete all the channels (1-128).

2. Reset (Delete all the settings in Frequency mode)

Hold on the FUN key and turn on the radio at the same time, the display will show

“RESET?”

. Press ENTER until “VFO?” is shown on the display; press it again for

confirmation to clear all the setting under the frequency mode.

3. Delete Frequency and the setting under frequency mode

Hold on FUN key and turn on the unit until display “

RESET?

”, press ENT until

display “VFO?”. Turn the

Encoder

knob to select “

FULL?

”, then press ENT to

delete the frequency and all the settings in Frequency mode.

«
...
6
7
8
9
10
...
»

Содержание PX-568






















Отзывы:

Нет отзывов