Puxing PX-568 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 21

Puxing PX-568 Скачать руководство пользователя страница 7

MICROPHONE
FUN(function key)
SPEAKER/MICROPHONE JACK
BATTERY PACK

Battery power indicator

TX offset direction in relation to the Rx frequency
TX offset direction in relation to the Rx frequency
Keypad locked
DCS tone
CTCSS tone
Priority scan
High/Lower power
Scrambler
VOX
Menu function
Received signal strength and TX power
Frequency display

Turn on and off the power/ Adjusting volume

If you want to turn on the power, rotate the

PWR/VOL

knob clockwise until a beep

sound is heard .All icons and frequencies appeared on the screen. You can adjust your
desired volume by turning the knob.
To turn off the power, rotate the

PWR/VOL

knob counter-clockwise rotation. All the

icons on the display will disappear and the radio is off.

After turning on the radio, rotate the

PWR/VOL

knob clockwise to increase the

volume and counter-clockwise to decrease.

MONITOR

Press and hold the defined side key 3 or 4, and with the PWR / VOL control knob to
hear the background noise of the channel and adjust the voice to comfortable degree,
you can directly listen to the sound without having to wait for your call. To turn off
the squelch release the side key.

Transmitting
Press the [PTT] key, and then facing the front of the radio microphone to speak.
Press and hold [PTT] key LED is red for the period.
If you rely on the microphone too close or too loudly may increase distortion and
reduce your signal in the receiver's clarity. Release [PTT] key received signal in order
to listen to the partner's speech.

«
...
5
6
7
8
9
...
»

Содержание PX-568






















Отзывы:

Нет отзывов