manualshive.com logo in svg
background image

To Customers 

 
Thank you very much for using our FM VHF/UHF Two Way Radio. This radio of   
modern design is reasonable structure with stable functions. It is designed to   
meet customer's needs for the high quality with easy operation and perfect capability. 
We believe you are pleased with the finished shape and the reasonable price. 
This manual is suitable for using the model of PX-568. 
 
 

CAUTIONS: 
 

z

  Before use this radio may need get local government authorization. 

z

  DO NOT operate the radio without a proper antenna attached, as this may 

damage the radio and may also exceed exposure limits 

z

  Refer service to qualified technicians only. 

z

  Turn off the radio while taking on fuel or while parked in a gasoline service 

station. 

z

  Do not expose the radio to long periods of direct sunlight, nor place it close 

to heating appliances. 

z

  If it appears that the radio diffuses peculiar smell or smoke, please shut off 

its power immediately, then contact with the nearest dealer. 

z

  Don’t keep the radio transmitting too long .It may be too hot to hurt body or 

damage the radio itself. 

z

  Please turn off the radio before entering the inflammable and explosive 

environment. 

 

z

 

CHECKING EQUIPMENT 
 

z

  Welcome to use our radio. Please check if any damage to the packing box 

before use. Carefully unpacks the radio. We recommend that you identify 
the items listed in the following table. If any items are missing or have been 
damaged during shipment, please inform the seller. 

 

z

 

SUPPLIED ACCESSORIES 

 

Содержание PX-568






















Отзывы: