•
Remove the new lamp from its packaging
. (DO NOT HOLD THE
ce checked gently lower the lamp back into the chamber,
onnecting the lead and then refit the bayonet cap.
•
Replace the side cover and switch the power back onto the unit.
•
To reset the UV lamp/s future r l
ction
5.5.10 “185nm UV Hours Date” Or “254nm Hours Date”.
7.6 REPLACING
FUSE/S
•
Isolate the unit from the electrical supply and unplug the mains
lead from the rear of the unit.
•
With the aid of a small flat blad
se
carrier from the IEC module. The two fuses will now be visible.
(See Fig-22)
•
Remove the fuse/s and insert r
rating. Refer to
Section 9.2,
in
EC
module.
•
Plug the mains lead back into the unit, switch the power back on
and restart the unit.
•
If the fuse/s fail again, then con c
er
to;
Section 11 Contacting Us,
for
Fig-22
Fuse holder
LAMP BY THE GLASS TUBE, IF YOU ACCIDENTALLY TOUCH
THE GLASS WIPE OFF ANY MARKS WITH ALCOHOL, ISO-
PROPYL ALCOHOL OR METHYLATED SPIRITS)
•
Check the markings on the white end cap of the lamp. A letter
“A” indicates it is a 185nm lamp. The letters “LS” indicate it
is a 254nm lamp.
•
On
rec
ep acement date, refer to
Se
ed screwdriver pries out the fu
eplacement fuse/s of the correct
to carrier and push back into I
ta t Purite or your supplier. Ref
details.
Fuse holder
containing
2 off 5 amp fuses
Refer to section 1.2.1 for
details
Select Neptune Manual Iss: B
Содержание SELECT NEPTUNE Analytical
