Purite SELECT NEPTUNE Analytical, Руководство пользователя, Страница: 54 / 90

This feature can be “
Disabled/Enabled”
by entering the
“Settings
e list and selecting
Standby Mode
, then
entering either
“Enabled”
or
“Disabled”
.
5.6
B
N
to ilable are: -
Menu”
scrolling down th
“
PROCESSING” SCREEN INFORMATION
y using the ▲▼ arrow buttons you can select any of the
SELECT
eptune’s
, 6 performance indicators. These will be displayed at the
p of the screen. The indicators ava
Indicators Units
“Flowrate”
L/min
Display of
recirculation/dispense
flowrate.
“Pressure”
Bar
Internal recirculation
pressure
“Out Qual”
M Ω
Quality available at point of
dispense
“Mid Qual”
M Ω Quality after first NCP pack.
“Temp”
0
C
Dispense water
temperature
“
TOC”*
ppb
Total Organic Carbon
indicator for dispense water.
Range: >1ppb
<5 ppb
<10 ppb
*
w
to
T
p
protection should a fault occur. The alarms can be split into Fatal
a
re
The message
“TOC Wait”
will be displayed if “TOC” is selected
ithin 2 minutes of starting the unit. This is to allow the TOC monitor
complete its start up routine.
5.7 SAFETY FEATURES
he
SELECT Neptune
has a number of safety features pre
rogrammed into its microprocessor control system designed as self
larms, these alarms will shut the unit down. If the condition persists
fer to Section 8 Troubleshooting for assistance.
PROCESSING
Proce
Dis
ss Mimic
play
EXIT SELECT
Select Neptune Manual Iss: B