PureTools PT-PMS-42S, Руководство пользователя

Страница: 53 / 68

User Manual
PT-PMS-42S
47
8.2.8 Third-party Device Control
The switcher supports RS232 pass-through control, the third-party device can be
controlled by RS232 command, and the command format as shown below:

Command Function Command Example
#SEND_[PARAM1]_[PA
RAM2]_[PARAM3]:XXX
X
Send the ASCII or HEX command to control the
third-party device.

[PARAM1]=A/H: Represents the command
format.
[PARAM1] Command Format
A ASCII
H HEX

[PARAM2]=01~02: Represents the RS232
port.
[PARAM2] RS232 Port
01
The RS232 port of the
switcher.
02
The RS232 port of the
far-end HDBaseT
receiver.

[PARAM3]=01~07: Represents the baud rate
of third-party device.
[PARAM3] Baud Rate
01 2400
02 4800
03 9600
04 19200
05 38400
06 57600
07 115200

XXXX: ASCII or HEX characters.
#SEND_A_01_05:1234
56789
Explanation: Send the
ASCII command
“123456789” to the
third-party device
which is connected to
the RS232 port of
switcher. The baud rate
of third-party device is
38400.
#SEND_H_02_05:30 31
32 33 34
Explanation: Send the
HEX command “30 31
32 33 34” to the
third-party device
which is connected to
the RS232 port of
receiver. The baud rate
of third-party device is
38400.