PureLink by Dtrovision
20
Command Code
Entered
Ack Value as appears in the control
program
Explanation of Result
*01CI01O01!
*01sC I01O01 !
The command was successfully executed
*01CO01!
Command Code Error
The command was not executed because
the input number was not included
*01CI01O01
Command Code Error
The command was not executed because “!”
(End) was not included
*300CI01O01!
Router ID Error
The command was not executed because
the actual Router ID and entered Router ID
did not match
4.6 Example Command Codes
A switch is an active connection between an input (source) signal and one or more output (display)
devices. The signals connected in a switch command are either individual signals or groups of signals
coming through the connectors on the rear of the unit.
The “C” key initiates a Connect command for routing a switch. The characters and numbers that follow the “C”
command tell the system, which inputs and outputs to connect. The last character “!” is found at the end of a
command code which tells the system to execute the command.
For example, the command code *255CI01O01!
can be interpreted as follows: (*) Starting the command code (255) Router ID is 255 (C) Create connection on
(I01) Input 01 to (O01) Output 01 (!) take the command. For a complete list of command characters and their
functions, see examples below.
To connect a switch:
1. Enter the Connect command below. Replace the “#”s with the input and output number(s).
*255CI#O#!
Examples (Connect) :
Command Codes
Action
*255CI01O01!
Connect Input 1 to Output 1
*255CI01O03,I06O02!
Connect Input 1 to Output 3 and Input 6 to Output 2
*255CI01O01,I02O02,I03O03!
Connect Input 1 to Output 1, Input 2 to Output 2, and Input 3 to Output 3
*255CI01O01,02,03!
Connect Input 1 to Output 1, 2, and 3
*255CI01O01-03!
Connect Input 1 to Output 1, 2, and 3
Disconnecting Switches
