PureLink by Dtrovision
19
16: 1920x1200 60Hz
?version
Firmware version check
Firmware version check command;
*01?version!
0x4E
0x6E
N
N
Networking setting
Network configuration setting command:
- IP Setting
*01NIP125.135.199.004!
- Subnet Mask Setting
*01NSM255.255.255.000!
- Gate Way Setting
*01NGW192.168.000.001!
- MAC Address Setting
*01NMA00.50.C2.B0.20.05!
- Port Number Setting
*01NPN3000!
- Network Information
*01NNI000!
1
0x48
0x68
H
H
Connection check
Router communication connection check
command: *255H000!
1
4.5 Command Ack (Acknowledge) Value Response
When command codes are entered into a terminal emulation program (such as HyperTerminal) and are
accepted by the system, they respond back to the terminal screen one at a time, as noted below in the
table. The complete command has executed successfully when a
ll of the entered characters including “s”
which stands for status, appear. If a command character is not accepted, a different character than the one
entered appears and all or part of the command has not been executed.
Ack (Acknowledge) Value Response Table
The following table shows ack value response characters along with their descriptions and meanings,
which may appear instead of the initially entered character or number. If these characters appear, all or part
of the command has not been executed.
Table 3.2 Descriptions of Acknowledge (ACK) Signals
Ack value
Description
Input 1 is not connected
No information in each channel.
Command Code Error
Indicates that system has rejected all or part of the command
Router ID Error
Indicates that the wrong ID number was entered
Command Code Ack Value Examples
