PureLink by Dtrovision
22
Command Codes
Action
*255BAALLS1!
Connect audio input 1 to ALL output
*255BAO01S2,O02B1!
Connect audio hdmi input 2 to output 1 and balanced input 1 to output 2
*255BAO01S1,O02S2,O03B4!
Connect audio hdmi input 1 to output 1,hdmi input 2 to output 2, and balanced input 4 to
output 3
*255BAO01-04B3!
Connect audio balanced input 3 to output 1, 2, 3, and 4
*255BAO01S0!
Mute audio to output 1
SPDIF Audio Output Audio Select Command
Examples (Connect
SPDIF Audio out
):
S1-S6 : HDMI input
S0 or MU : Not connected (Mute)
Command Codes
Action
*255SAS1!
Connect All of HDMI Source audio from HDMI input 1
*255SAMU!
Mute audio to HDMI Source audio
PIP setting command
Start (*) + Router ID (001) + Command (M) + PIP ON/OFF(S1/S0) Input number (I01) + End (!) + Enter (
)
MS0 : PIP ON
MS1 : PIP OFF
I01 : Input select (I01 ~ I06)
Example:
Command Codes
Action
*999MS1I01!
PIP ON INPUT 1
*999MS1I03!
PIP ON INPUT 3
*999MS0I01!
PIP OFF
Connection Status Check
A connection status can be checked to confirm that the switch has been correctly executed or to
confirm correct routing to multiple outputs. The characters and numbers in a status command tell the
system which input or output to check.
1. Enter the Connection status check command below. Replace the “#”s with the input and output
number(s).
*255?I#!
or *255?O#!
