manualshive.com logo in svg

PureLink PS-6300S, Руководство пользователя

Поделиться
Скачать
PureLink PS-6300S Скачать руководство пользователя страница 13

PureLink by Dtrovision 

 

                                                                                                                                                                                                                 

13 

-

 

Select Output # using CREATE (Up) and PREVIEW (Down) buttons then press ENTER 

-

 

Select input audio 

-

 

Press ENTER button to save 

 

6. Analog audio output audio selection   

PS-6300S has three (3) balanced/unbalanced audio outputs and S/PDIF Audio output 

User can select either HDMI embedded, balanced/unbalanced audio or mute to each audio output 

-

 

Select Output #(output 1~3, and S/PDIF) using  CREATE (Up) and PREVIEW (Down) buttons then press 

ENTER 

-

 

Select input audio 

-

 

Press ENTER button to save 

 

7. EDID 

i)  Int EDID Burn 

-

 On this menu, select an EDID from the library and save it on to the Input EEPROM. PA-6300S has 

14 selectable most widely  used EDID data  pre-programmed and 6  empty slots that can  be  used to 

upload and save EDID data from any external display device. 

  Select Internal EDID using UP (Create) and Down (Preview) buttons 

  Select  Input#  where  selected  EDID  data  will  be  saved  on  to.  Multiple  Inputs  can  be  selected  at 

once. 

  Press enter button to save 

* “P” will display on the LCD when EDID is successfully saved, “F” will display on the 

  LCD when EDID is NOT successfully saved. 

 

ii) Ext EDID Burn 

- This menu is to emulate EDID data from any display devices that are connected to the   

Matrix Router's Output via copper cables and save it on to Matrix Router's Input EEPROM. 

  Select Output #   

  Selected Output's display device's EDID information will be displayed 

  Select  Input#  where  selected  EDID  data  will  be  saved  on  to.  Multiple  Input  can  be  selected  at 

once. 

  Push enter button to save. 

* “P” will display on the LCD when EDID is successfully saved, “F” will display on the   

Содержание PS-6300S


























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды