Pulsar QUANTUM3, Инструкция по эксплуатации

Страница: 97 / 207

Page
89
Miscellaneous
When P210, 220, 230, 240, 250, 260, 270, 280, 290, 570 = 4 (Miscellan.)
When a relay is set to be miscellaneous relay, the second parameter
determines its function .
P211, P221, P231, P241, P251, P261, P271, P281, P291, P571
Relay Function
,
This function allows the relay to work in relation to a clock and will be set to
activate in relation to Real Time or to provide a pulsed output in relation to a
predetermined count from the totaliser, the choices being as follows:
Options Description
0 = Off (Default) Relay Off de-energised
1 = Clock Relay will energise ON at a specified time
each day as set in Relay Setpoint 1 (P2 1 3,
2 2 3, 2 3 3, 2 4 3, 2 5 3, 2 6 3, 2 7 3, 2 8 3, 2 9 3,
5 7 3). And turns OFF , de-energises , after
the specified On Time period as set in Relay
Setpoint 2 (P2
1 4, 2 2 4, 2 3 4, 2 4 4, 2 5 4, 2 6 4,
2 7 4, 2 8 4, 2 9 4, 5 7 4)
2 = Totaliser Relay will energise ON momentarily each
time the specified flow has passed as set in
Relay setpoint 1 (P2
1 3, 2 2 3, 2 3 3, 2 4 3, 2 5 3,
2 6 3, 2 7 3, 2 8 3, 2 9 3, 5 7 3), this parameter sets
the multiplication factor which will be
applied to the on board totaliser (P820) to
determine the switch point of the relay. E.g.
if the totaliser is set to totalise in cubic
metres and the relay is required to provide a
closure every 10,000 litres Relay setpoint 1
would be set to 10. Relay setpoint 2 (P2
1 4,
2 2 4, 2 3 4, 2 44 , 2 5 4, 2 6 4, 2 7 4, 2 8 4, 2 9 4, 5 7 4)
can be used to select the time the relay will
remain closed in seconds.