Pulsar QUANTUM3, Инструкция по эксплуатации

Страница: 106 / 207

Page
98
Wall Cling
To reduce material build up (such as fat), on the wall of the sump or vessel,
at the “normal” material level the pump setpoints can be varied within a
specified band.
For Pump Down applications the relay setpoints for the pumps will be
randomly varied within the band specified, somewhere below ON, but to a
maximum of the setting, and somewhere higher than OFF, but to a maximum
of the setting.
For Pump Up applications the relay setpoints for the pumps will be randomly
varied within the band specified somewhere higher than ON, but to a
maximum of the setting, and somewhere lower than OFF, but to a maximum
of the setting.
P360 Wall Cling
Enter the maximum band, of variation, required in metres.
Storm
This facility enables all pumps to be disabled ( P370 ) during a storm condition
to prevent the futile running or potential damage due to the continued use of
pumps during flood conditions. Provision is also made to allow a maximum
time period ( P371 ) for which pumps will remain disabled during such
conditions. For this function to operate a relay must have been assigned to
Storm and have Upper and Lower storm setpoints set. See
P210, 220, 230,
240, 250 = 3 (Control) P211, 221, 231, 241, 251, Relay Function =2 (Storm)
for further details.
P370 Pump Disable
This parameter sets the action required during a flood condition.
Option Description
0 = Disabled Pumps Disabled during Storm condition.
1 = Normal (Default) Normal Pump operation during Storm
condition
P371 Disable Time
This parameter will set the maximum time pumps will remain disabled if P370
= 0 Enter desired time in minutes.
Default = 30 minutes