Pulsar QUANTUM3, Инструкция по эксплуатации

Страница: 93 / 207

Page
85
Options Description
7 = Pump Reset Relay will energise “ ON
” for the period of
the Reset Pulse (P309) after expiry of the
Reset Interval (P308), provided the level is
above the Prime Level (P349), to reset the
designated pump that has tripped. Alarm ID
(P2 1 2, 2 2 2, 2 3 2, 2 4 2, 2 5 2, 2 6 2, 2 7 2, 2 8 2,
2 9 2, 5 7 2) is used to enter the relay number ,
to which the designated pump is connected .
The third parameter for each relay determines the assignment or condition
of the relay, where required.
P212, P222, P232, P242, P252, P262, P272, P282, P292, P572
Relay Alarm ID/Pump Group
,
P211, 221, 231, 241, 251, 261, 271, 281, 291, 571 = 1, 2, 3 or 6
This parameter has no function and will not be displayed.
P211, 221, 231, 241, 251, 261, 271, 281, 291, 571 = 4 (Flush Valve)
If the relay is selected for Flush Valve/Pump , then this parameter is used to
determine to which pump the Flush function is assigned. Enter the relay
number to which the assigned pump is connected .
P211, 221, 231, 241, 251, 261, 271,281,291,571 = 5 (Step Time)
If the relay is selected for Step Time , then this parameter is used to assign the
relay to the 0 = Open condition (increase level) or 1 = Clos e condition
(decrease level).
P211, 221, 231, 241, 251, 261, 271, 281, 291, 571 = 7 (Pump Reset)
If the relay is selected for Pump Reset , then this parameter is used to
determine to which pump the Pump Reset function is assigned. Enter the
relay number to which the assigned pump is connected .