Pulsar FlowCERT LITE, Инструкция по эксплуатации

Страница: 82 / 150

Page 74
P210, P220, P230, P240, P250 - Relay Type
This parameter defines what type each relay should be, see the table below
for available options.
Option Description
0= Not In Use (Default)
Relay not in use or programmed and LED
will always be off.
1= Alarm Relay is programmed as an alarm relay,
which will
de-energise ON , and energise
OFF . This will ensure an alarm is raised if
the power fails to the unit.
2= Pump
Relay is programmed as a pump relay, which
will
energise ON , and de-energise OFF .
3= Control Relay is programmed as a control relay,
which will
energise ON , and de-energise
OFF.
4= Miscellaneous
Relay is programmed as a miscellaneous
relay, which will
energise ON , and de-
energise OFF .