Puls PIM90.241, Руководство пользователя

Страница: 2 / 17

PIM90.241
Feb. 2022 / Rev. 2.0 DS-PIM90.241-EN www.pulspower.com 2 / 17
All parameters are specified at 24V, 3.8A, 230Vac, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
Index
1 Intended Use....................................................... 3
2 Installation Instructions...................................... 3
3 AC-Input.............................................................. 4
4 DC-Input.............................................................. 5
5 Input Inrush Current.......................................... 5
6 Output................................................................. 6
7 Hold-up Time...................................................... 7
8 Efficiency and Power Losses.............................. 8
9 Lifetime Expectancy........................................... 9
10 MTBF.................................................................... 9
11 Functional Diagram............................................ 10
12 Terminals And Wiring........................................ 10
13 Front Side And User Elements........................... 11
14 EMC.....................................................................
12
15 Environment....................................................... 13
16 Safety and Protection Features......................... 14
17 Dielectric Strength.............................................. 14
18 Approved, Fulfilled or Tested Standards........... 15
19 Regulatory Product Compliance........................ 15
20 Physical Dimensions And Weight...................... 16
21 Application Notes............................................... 17
21.1 Charging of Batteries.............................. 17
21.2 Series Operation...................................... 17
21.3 Parallel Use to Increase Output Power... 17
21.4 Parallel Use for 1+1 Redundancy........... 17
21.5 Two Phase Operation............................. 17
21.6 Use in a Tightly Sealed Enclosure........... 17
The information given in this document is correct to the best of our knowledge and experience at the time of publication.
If not expressly agreed otherwise, this information does not represent a warranty in the legal sense of the word. As the
state of our knowledge and experience is constantly changing, the information in this data sheet is subject to revision. We
therefore kindly ask you to always use the latest issue of this document (available under www.pulspower.com).
No part of this document may be reproduced or utilized in any form without our prior permission in writing.
Packaging and packaging aids can and should always be recycled. The product itself may not be disposed of as domestic
refuse.
TERMINOLOGY AND ABBREVIATIONS
PE and Symbol PE is the abbreviation for Protective Earth and has the same meaning as the symbol .
Earth, Ground This document uses the term “earth” which is the same as the U.S. term “ground”.
t.b.d. To be defined, value or description will follow later.
AC 230V A figure displayed with the AC or DC before the value represents a nominal voltage with
standard tolerances (usually ±15%) included.
E.g.: DC 12V describes a 12V battery disregarding whether it is full (13.7V) or flat (10V)
230Vac A figure with the unit (Vac) at the end is a momentary figure without any additional
tolerances included.
50Hz vs. 60Hz As long as not otherwise stated, AC 100V and AC 230V parameters are valid at 50Hz mains
frequency. AC 120V parameters are valid for 60Hz mains frequency.
may A key word indicating flexibility of choice with no implied preference.
shall A key word indicating a mandatory requirement.
should A key word indicating flexibility of choice with a strongly preferred implementation.