Puls PIM90.241, Руководство пользователя

Страница: 4 / 17

PIM90.241
Feb. 2022 / Rev. 2.0 DS-PIM90.241-EN www.pulspower.com 4 / 17
All parameters are specified at 24V, 3.8A, 230Vac, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
3. AC-Input
The device is suitable to be supplied from TN, TT or IT mains networks.
AC input nom. AC 100-240V
AC input range 90-264Vac Continuous operation
264-300Vac For maximum 500ms
Allowed voltage L or N to
earth max. 300Vac Continuous, according to IEC 60664-1
Input frequency nom. 50-60Hz ±6%
Turn-on voltage typ. 75Vac Steady-state value, see Fig. 3-1
Shut-down voltage typ. 54Vac Steady-state value, see Fig. 3-1
External input protection See recommendations in chapter 2.
AC 100V AC 120V AC 230V
Input current typ. 1.69A 1.45A 0.95A At 24V, 3.8A, see Fig. 3-1
Power factor typ. 0.6 0.58 0.45 At 24V, 3.8A, see Fig. 3-4
Start-up delay typ. 50ms 50ms 50ms See Fig. 3-2
typ. 21ms 21ms 20ms At 24V, 3.8A constant current load,
0mF load capacitance, see Fig. 3-2 Rise time
typ. 42ms 42ms 40ms At 24V, 3.8A constant current load,
2mF load capacitance, see Fig. 3-2
Turn-on overshoot max. 100mV 100mV 100mV See Fig. 3-2
Fig. 3-1: Input voltage range Fig. 3-2: Turn-on behavior, definitions
Fig. 3-3: Input current vs. output
load at 24V output voltage
Fig. 3-4: Power factor vs. output
load at 24V output voltage