EN
storage will be automatically removed.
7.
In the state of data storing, after the screen is automatically
shut down, the pulse sound indication would be off for saving
power.
8.
When the storage space is full, it displays "Memory is full" on
the screen, and then shut down in a few seconds. But it will
still display "Memory is full" by the next time you turn on the
device on the purpose of warning the user, if press any button
(power on/off excluded) again, it will enter the measure
interface.
e.
Device ID
The user could modify device ID by software "SpO
2
Assistant".
f.
Clock setting
In the main menu interface, press the "up button" or "down button"
to select "Clock", then enter the clock setting interface by press the
"left button" or "right button".
Figure13 Clock Setting Interface
1.
When entering the clock setting menu as Figure13, the menu
choice bar would be on the item of "set time", and the state
would always be "no" whenever it enters the clock setting
menu on the purpose of avoiding unexpected changes of time
due to improper operation. You can change the state by press
the "left button" or "right button", choose "yes" to reset the
time, choose "no" to forbid time resetting.
2.
Press the "up button" or "down button" to select the
parameter that you want to change, then adjust the data by
pressing the "left button" or "right button".
3.
Exit the clock setting menu directly by pressing the "menu
button".If you have reset the time or date, when exiting the
clock setting menu, firstly the renewed time and date would
be displayed on the screen, then it returns to the main menu;
if you didn’t reset the time and date, when exiting the clock
