Pulley-man CSW-3060, Руководство пользователя

Страница: 15 / 38

14
Ⅲ
. Uses and Operations
4. Incorporation and Removal of Wire Rope
Wire rope of PULLEY-MAN is separate from main body unless it is incorporated.
Before installation, assemble main body with wire rope. Incorporate wire rope into main body in following
procedures. (Follow the procedures backwards when removing wire rope from main body).
❶
Pull off In-Let Lock Pin.
Remove split pin and pull loop
of in-let lock pin.
❷
Pull off two press Roller Casing
Lock Pins.
Remove split pins and pull loops of
press roller casing lock pins.
❸
Remove Hook of main body
(Single-Line Use).
Remove nut-holding pin and nut and
pull off hexagon bolt.
❸ Remove Double-Line Hook
Cover (Double-Line Use).
Remove nut-holding pin and nut and
pull off hexagon bolt.
❹ Incorporate Wire Rope into pulley
groove.
Inserting direction is from in-let
lock pin toward press roller casing.
Pull out Wire Rope long enough
for operation before fitting onto pulley
groove.
❺ Push in In-Let Lock Pin.
Push in the pin from gear-side frame
and insert split pin.
❻ Re-assemble main body Hook
(Single-Line Use).
Screw in hexagon bolt, lock nut,
and insert nut-holding pin.
1) Procedures of Incorporation: CSW-3060