Pulley-man CSW-3060, Руководство пользователя

Страница: 16 / 38

15
Ⅲ
. Uses and Operations
❻
Re-assemble double-line Hook
Cover (Double-Line Use).
Screw in hexagon bolt, lock nut, and
insert nut-holding pin.
❼
Press Wire Rope with Press Roller
Casing.
Lift press roller casing about 90 ° and
pass wire rope between out-let roller
and press roller casing. Pull wire
rope in end-stopper direction so that
it fits to bottom of pulley groove.
Close press roller casing toward
frame so as to press wire rope.
Check if press rollers are
pressing wire rope.
Insert wire rope between sheave and
side plates, and re-assemble hook
w i t h w i r e r o p e s o c k e t. B e f o r e
re-assembling hook, check if wire
rope is properly laid in the middle of
sheave groove. Screw in bolt and nut
and insert nut-holding pin. Assemble wire rope socket to double-
line hook cover. Screw in nut and insert
nut-holding pin.
Incorporation of Wire Rope comploted.
When holes for lock pins on frames and
press roller casing are in line, insert lock
pins from speed-reducer-side frame and
insert split pins.
(Single-Line User : END)
(Double-Line User : END)
❽
Push in Press Roller Casing Lock
Pin.
❾ Separate Hook from Wire Rope
Socket.
Remove nut-holding pin, bolt and
nut from wire rope socket, which is
connecting wirerope hook and wire
rope at tip of wire rope.
❿ Insert wire rope over Hook Black
and re-assemble Hook.
 Connect wire rope socket to double-
line hook cover.