Pulley-man CSW-3060, Руководство пользователя

Страница: 17 / 38

16
Ⅲ
. Uses and Operations
5. Treatment of Wire Tip
3) Fixation of End-Stopper
Fix the other tip of wire rope with steel cube by press fixation method. Thickness of the steel should be
more than 10㎜ after press. Grind remnant wire rope off the end-stopper.
▶ When using a wire rope longer than the one provided by manufacturer(40ft. (12m)), use one
recommended by manufacturer, and fix wire tip by either method shown above and connect wire
rope socket (wire rope provided by manufacturer is fixed by press fixation method).
▶ When fixing wire tip, its safety factor must be at least 5 times and a safety test must be
conducted before using it.
▶ Contact manufacturer when employing wire rope longer than 40ft. (12m)
10㎜
End-stopper
1) Clip Fixation
For wire ropes whose diameters are less than 5/8in. (16mm), use 4 clips and give spacing
between clips wider than 6 times diameter of Wire Rope.
2) Press Fixation
Use cold-pressed steel.