PSSO FG SERIES, Руководство пользователя

Страница: 43 / 51

00041652.DOC, Version 1.2 43/51
PHONE TALKBACK
MIC
5.4 Master module
TALKBACK MIC
You can connect condenser mics with Phantom power with XLR plug to
the TALKBACK MIC socket.
HEADPHONES
You can connect your headphones (100 – 600 ohms) here.
MASTER LEVEL / GROUP / AFL DISPLAY
The display indicates the Master signal. If any SOLO switch of any
channel is pressed, the display shows the mono SOLO level.
LEVEL
With the LEVEL control, you can adjust the microphone
volume.
MON
With pressed MON switch, the microphone signal is
routed to MON 1&2.
AUX
With pressed AUX switch, the microphone signal is routed to Aux 1&2.
GRP
With pressed GRP switch, the microphone signal is routed to the group bus.
MAS
With pressed MAS switch, the microphone signal is routed to the master fader.
PHONES LEVEL
With the PHONES LEVEL control, you can adjust the output level of the HEADPHONES
sockets. The signal sources are either, the master mix, the external stereo input (Tape
Return sockets) or any signal source with pressed SOLO/AFL switch (Solo function).
SPEAKERS LEVEL
With the SPEAKERS LEVEL control, you can adjust the output level of the SPEAKERS
sockets. The signal sources are either, the master mix, the external stereo input (Tape
Return sockets) or any signal source with pressed SOLO/AFL switch (Solo function).
TAPE/MAS
With the TAPE/MAS switch, you can select the signal source of the monitor system. With
unpressed switch, the master signal will be routed. With pressed switch, the external stereo
signal (Tape Return sockets) will be routed. As soon as any SOLO/AFL switch (Solo
function) is pressed, the TAPE/MAS signal is switched off.
SOLO
With the SOLO control, you can adjust the SOLO output signal before it is routed to the HEADPHONES or
SPEAKERS socket. The signal source is either any signal source with pressed SOLO/AFL switch (Solo
function) or the stereo AFL signal.
SOLO/AFL
As soon as any SOLO/AFL switch (Solo function) is pressed, this signal source (or the sum of several soloed
channels) will be routed to the monitor system.
If there is no signal output at the monitor system, although you routed it there, it may be possible that you
soloed a channel without input signal. In this case, switch off the solo function of the respective channel.
0
+10
8
0
+10
8
AFL L/R
PFL
SOLO
SOURCE
MAS
TAPE
SPEAKERS
LEVEL
0
+10
8
SOLO
PHONE
LEVEL
MAS
GRP
AUX
MON
30
+50
8
LEVEL
TALKBACK
+16
+12
+9
+6
+3
0
-3
-6
-9
-12
-15
-10
-21
-24
+16 +16 +16
+12 +12 +12
+9 +9 +9
+6 +6 +6
+3 +3 +3
0 0 0
-3 -3 -3
-6 -6 -6
-9 -9 -9
-12 -12 -12
-15 -15 -15
-10 -10 -10
-21 -21 -21
-24 -24 -24
1 2
GROUP
3 4
GROUP
AFL-L AFL-R
PFL
1 MON 2 MASTERS
LEFT RIGHT