00041652.DOC, Version 1.2
42/51
0
+10
8
0
+10
8
0
+10
8
0
+10
8
Fx1
MUTE
SOLO
RETURN-ROUTING
1-2
3-4
MAS
Fx1
SEND
Fx1
RETURN
MON 1
PRE
MON 2
PRE
FX 1&2
MUTE
If you want to mute a channel, set the MUTE switch to unpressed position. When the
MUTE switch is pressed, the channel is active and the LED is lit. Switch unused channels
off via the MUTE-switch in order to avoid undesired noise.
SOLO
With the SOLO switch, you can route a effect channel to the monitor section (Solo). With
pressed SOLO switch, Solo is activated and the LED is lit. SOLO signals of different input
channels are summed.
G1-2 or G3-4
With the Group switch, you can route the signal to the respective group bus. In this way,
you can sum up different input channels into one group, e.g. drums, winds or background
singers.
MAS
With the MAS switch, you can route the signal to the MASTER fader.
FX 1&2 SEND
With the FX SEND controls, you can adjust the output level of the FX SEND sockets.
FX 1&2 RETURN
With the FX RETURN controls, you can adjust the input level of the FX RETURN sockets.
MON 1&2 controls
With the MON 1&2 control, you can control the signal portion sent to the respective MON
SEND socket. The MON 1&2 signal is pre-fader and can be used for stage monitors or
musician headphones.
