00041652.DOC, Version 1.2
37/51
AUXILIARIES
Every input channel features 6 auxiliaries controllable via 6 rotary controls. With the AUX
control, you can control the signal portion sent to the respective AUX SEND socket. The FX
1&2 signal is post-fader and can be used for effectors etc. The MON 1&2 signal is pre-fader
and can be used for stage monitors or musician headphones. The AUX 1&2 signal can be
switched from post-fader to pre-fader in the master section.
PAN
With the PAN control, you can position the signal of a mono input in the stereo output. The
signal level remains constant.
MUTE
If you want to mute a channel, set the MUTE switch to unpressed position. When the MUTE
switch is pressed, the channel is active and the LED is lit. Switch unused channels off via
the MUTE switch in order to avoid undesired noise.
SOLO
With the SOLO switch, you can route an input channel to the monitor section (Solo). With
pressed SOLO switch, Solo is activated and the LED is lit. SOLO signals of different input
channels are summed.
Channel display
The display shows the individual channel signal.
G1-2 or G3-4
With the Group switch, you can route the signal to the respective group bus. In this way, you
can sum up different input channels into one group, e.g. drums, winds or background
singers.
MAS
With the MAS switch, you can route the signal to the MASTER fader.
Channel fader
With the channel fader, you can adjust the signal level of the respective input channel.
0
+10
8
0
+10
8
0
+10
8
0
+10
8
0
+10
8
0
+10
8
R
L
FX 1
POST
FX 2
POST
MON 1
PRE
MON 2
PRE
AUX 1
AUX 2
PAN
MUTE
25
SOLO
PK
SIG
10
5
0
5
10
15
20
25
40
60
80
8
1-2
3-4
MAS
INPUT
0
