00041652.DOC, Version 1.2
38/51
Stereo Input
GAIN MIC
With the GAIN control, you can set the level of the microphone input signal. The control
range is between 0 and 60 dB. Please refer to Adjusting the input level.
LOW CUT
With the Low Cut switch, you can activate the highpass filter. This filter reduces low-
frequency noise like microphone punch, closetalk, stage noise etc. with 80 Hz and a slope
of 12 dB/octave. The bass filter works independently from the equalizer settings.
LINE TRIM
With the GAIN control, you can set the level of the line input signals. The control range is
between -20 to +40 dB for the line signals. Please refer to Adjusting the input level.
TREBLE
With the TREBLE control, you can increase or lower the treble of the input signal at the
respective channel. This is a 12 kHz shelving equalizer with a control range of ±15 dB.
HI MID
With the HI MID control, you can increase or lower the Hi mids of the input signal at the
respective channel. The HI MID equalizer a 3 kHz shelving equalizer with a control range
of ±15 dB.
LO MID
With the LO MID control, you can increase or lower the Low mids of the input signal at the
respective channel. The LO MID equalizer a 300 Hz shelving equalizer with a control
range of ±15 dB.
BASS
With the BASS control, you can increase or lower the bass of the input signal at the
respective channel. This is an 80 Hz bell equalizer with a control range of ±15 dB.
EQ
With the EQ switch, you can bypass the equalizer.
17-18
+48V
80Hz
0
+60
0
0
+20
-20
0
+15
-15
0
+15
-15
0
+15
-15
0
+15
-15
GAIN
MIC
LINE
TRIM
TREBLE
12KHz
HI MID
3KHz
LO MID
300Hz
BASS
80Hz
EQ
ON
OFF
