26
BoardWalk Ramp and Platform Assembly Instructions
EIGHT SECTION RAMP w HANDRAILS
Place one
90 degree fitting
(#B) on each end of the
horizontal handrail
(#A) section. Do not tighten set screws on the 90 degree fitting
yet.
Note: The set screws go to the outside of the ramp.
STEP 6
B.
A.
Repeat with the remaining four
standard sections
(#1). Note:
May require to lift the end of the ramp as you assemble the ramp.
Repeat steps two and three with the
bottom section with
approach plate and handrail uprights
(#6)
(black band). Place
onto the ground. Lower the approach plate onto the ground.
STEP 4
STEP 5
1.
6.
