background image

Mix (PSP MasterComp only)

Sets the amount of processed signal (post make-up) and input signal sent to the output level 
control and output limiter. This allows to dial in a transient transparent sound with gently 
processed middle dynamic ranges.

Output

Controls the output gain of the signal just before the output limiter in PSP MasterComp and 
just before the output in PSP MicroComp.

On/Off

Engages or disengages processing. When set to off,  metering still occurs although the signal 
is untouched. 

Caution!

 Turning processing On and Off during playback may produce a gain 

change and corresponding click.

Fat/Off

PSP MasterComp only. Engages Frequency Authentication Technique (FAT) for high quality 
double sampled processing. Please note that when a FAT mode is engaged the plug-in is 
using about 2.5x more CPU then with FAT mode switched off.

Caution!

  Turning FAT On and Off during playback may produce a considerable click or 

glitch.

Smooth button (PSP MasterComp) or Fast/Smooth switch (PSP MicroComp)

Engages   the   premium   quality   (PSP   MasterComp)   and   high   quality   (PSP   MicroComp) 
Smooth   Level   Detector   algorithm.   In   this   mode,   compression   distortion   is   significantly 
reduced   for   mid   range   and   low   frequencies.   In   previous   PSP  MasterComp   editions   the 
premium quality Smooth Level Detector was always on. Now you have a choice between a 
smooth, CPU hungry mode and a faster and less transparent mode. 

Please notice that Fast mode doesn't necessarily mean it is a worse choice or a compromise. 
This mode still provides very high quality processing and may be the best choice for many 
applications. In PSP MasterComp, when the button in not lit plug-in turns on its high quality 
Smooth Level Detector mode which is easier on CPU than the premium Smooth mode, 
however it still sounds very close to the original Smooth mode. In the PSP MicroComp the 
Fast mode completely omits the Smooth Level Detector algorithm, which results in further 
CPU consumption reduction and more aggressive sound.

Hard/Soft switch (PSP MasterComp) or Soft Knee button (PSP MicroComp)

PSP MasterComp & PSP MicroComp operation manual

12

Содержание Master Comp



















Отзывы: