High s.c. filter switch (PSP MicroComp only)
This is a three state switch. The “
_/
” position activates a high frequency boost in the side
chain signal to increase response on sibilants. Use this setting whenever extra attenuation on
higher frequencyiesis needed for instance during de-essing. The “--” position activates a flat
response low frequency side chain filter. Use setting for most individual tracks, groups and
entire mixes. The“
\_
” position attenuates high frequencies to in order make a complex
signal unmodulated by high frequencies. You may wish to do this to avoid modulating from a
loud hi-hat track, for example.
s.c. Monit
Engages side chain monitoring mode, which provides an input processed by side chain filters
to the output.
Link knob (PSP MasterComp only)
Sets the amount of linking between channels. Variable control of this parameter allows you to
find the most musical setting that won’t shift the stereo field.
Link switch (PSP MicroComp only)
Sets the algorithm to linked mode, which is the proper setting for most stereo track
compressions. Try the unlinked mode during expansion.
Link Low Cut (PSP MasterComp only)
Gently cuts low frequencies from a linking signal, making an alternative stereo field response
for situations when low frequencies should not affect linking.
Link High Cut (PSP MasterComp only)
Gently cuts high frequencies from a linking signal, making an alternative stereo field
response for when high frequencies should not affect linking.
Tilt (PSP MasterComp only)
Controls side chain left/right volume balance, which allows for precise adjustment of channel
processing depth whenever not balanced input signal occurs.
PSP MasterComp & PSP MicroComp operation manual
11
