Front panel
Meters
PSP MasterComp’s and PSP MicroComp's meters contain VU and PPM needle readings,
contextual numeric readings which are held for two seconds, and overload LED indicators
that are held until reset. All main parameters of meters are rear panel controlled.
VU is mainly indicated by a long black needle and the contextually displayed number on the
left part of the meter.
PPM is mainly indicated by a short red needle and the contextually displayed number on the
right part of the meter. The black text turns to red one if 0dBFS or greater is detected. Please
note that the reading is not equal to digital metering if the integration time is set to a greater
value then 0ms.
PSP MasterComp & PSP MicroComp operation manual
7
VU held
value
PPM held
value
PPM
indication
VU
indication
Overload
indication
