PSC PowerWedge 10, Руководство пользователя

Страница: 14 / 116

PowerWedge 10 Installation
9
PowerWedge
®
10
3. S
TAND
-A
LONE
C
ONFIGURATION
Attach the other end of the cable
to an available serial port on your computer or terminal (see
Figure 3
).
E
AVESDROP
C
ONFIGURATION
Locate the cable that connects your
computer or terminal to the host. Unplug that cable from the com-
puter or terminal’s serial port, and attach it to the connector labeled
COMPUTER
on the PowerWedge 10 interface cable. Then attach the
connector labeled
TERMINAL
on the PowerWedge 10 cable to the
computer or terminal’s serial port (see
Figure 4
).
Figure 4. Connecting the PowerWedge 10 to a terminal in a multiuser system
4. Attach the small, round plug of the 9-volt power adapter to the
power input jack on the PowerWedge 10 (see
Figure 1
). Plug the other
NOTE
Figure 4
shows cable number 00-876-02. Your computer or terminal may
require a different cable.
Use only a power adapter supplied by your Dealer. Using another adapter can
damage the decoder or input device.
1
Power adapter
Connector labeled
COMPUTER
—
attach to cable from host
Drawing not to scale
Connector
labeled
TERMINAL
—attach
to serial port on terminal or
computer