PSC PowerWedge 10, Руководство пользователя

Страница: 27 / 116

Programming the PowerWedge 10
User’s Guide
22
7. Select another option from the list, or press the
Backspace
key to
return to the main menu.
8. When you are finished checking or changing parameter settings,
type EE at the prompt and press
Enter
. This will save your changes
and exit on-screen programming.
9. Press
Ctrl+Z
and then press
Enter
to return to the DOS prompt.
Displaying and Printing Current Settings
While you are in on-screen programming mode, you can display the cur-
rent settings for all the parameters. At the main menu prompt, type E and
press
Enter
, and then type D and press
Enter
again. At the next prompt
(
ECHO SETTINGS TO SCREEN
), type 1 and press
Enter
. A list of all the parame-
ters will appear on your screen. You can pause the display of the list at any
time by pressing the
Pause
key on your keyboard; then press any key to
continue the display.
If you are using a text editor, you can use commands in the editor’s menu
to print the list of settings or save it to a file. If you are working from the
DOS prompt, you can also save or print the list of settings. To print or
save the list, follow steps 1 through 9 above, with the following changes in
step 2:
• To print the list, use the following command: copy con prn.
• To save the list as a file, use the following command: copy con file-
name .
NOTE
To leave on-screen programming without saving any changes, type
EF
and
press
Enter
.