10. OPERATION INSTRUCTIONS
VISITOR CALL
Standby Mode
The visitor presses the
CALL BUTTON
on Door Station 1
The visitor presses the
CALL BUTTON
on Door Station 2
A 1Os of continuous Ding Dong tone
is heard inside and outside
The visitor’s image automatically displayed on the screen
Press the
TALK BUTTON
on indoor monitor
Stop ringing
Start conversation with Door Station
The conversation duration is 120s at a time
Press the
UNLOCK BUTTON
on indoor monitor
release the door lock
Press the hang up button on indoor monitor
END
11. MONITORING
By default, Door1, Door2, CAM1 and CAM2 can be monitored. To disable monitoring of
Door2, set “Door2 Status” to OFF in the Mode menu. To disable monitoring of CAM1 and/or
CAM2, set their corresponding “CAM1” and “CAM2” switch to OFF in the Alarm menu.
Standby Mode
DOOR 1
CAM 1
DOOR 2
CAM 2
Show DOOR 1 Image
Show CAM 1 Image
Show DOOR 2 Image
Show CAM 2 Image
Each monitoring time is 60s
Press the
CALL BUTTON
Call Door Station
Press the
UNLOCK BUTTON
on the indoor Monitor to open the electric lock
Press the
HANG UP BUTTON
to end the call
Close display
14
15
The Monitor will stay active for 20 seconds for the viewer to confirm that the visitor has
entered the door.
For models with a MicroSD card installed and Record function active: Recording will start
from the beginning of a call, and can be manually stopped by pressing
Button.
For models with a MicroSD card installed and snapshot function active: A snapshot will
be taken at the start of the call. The user can also press
button to take another
snapshot manually.
In Monitoring mode, the monitor can listen to the door station. Press
button to
begin a conversation. Press
button to unlock the door.
If you are only using one Door Station, you can exit Monitoring mode by pressing the
again (when Door2, Cam1 and Cam2 have been disabled in the menu).
If you are using two indoor Monitors, both can simultaneously monitor the same door
station. The same image will be displayed on both monitors.
If either door station calls while the user is in Monitoring mode, the monitor will ring, exit
monitoring mode and display video of the new caller.
With an MicroSD card installed, the first press of
button will start recording (if the
recording setting is active); or will take a snapshot (if the snapshot setting is active).
Note:
If the call buttons of both
Door Stations are pressed
about the same time,
preference would be given
to the Door Station whose
call button was pressed
first. Please be aware
there is no indication at
the second Door Station.
After the indoor monitor
returns to Standby Mode,
it can accept calls from the
second Door Station.
Note:
The indoor monitor
will automatically go
into Standby Mode,
if you are not at home,
or have not answered
the call within 60s.
