14.2.1.4
Ring
This menu allows you to change the ring-tone on the monitor with an installed microSD card
containing suitable ringtone files.
[Mode]:
There are two mode for ring-tones: “Custom” and “Default”. There are 10 default
inbuilt ring-tones for selection. In the “Custom” mode, user ringtones can be
selected from the “\USER\Ring” directory on the microSD card.
[Door 1 Ring]: [Door2 Ring]:
Sets Default and Custom ringtones for each door station.
Use
and
&
to adjust the two settings.
Change the mode to “Custom” for custom ringtones.
1. Create a “\USER\Ring” directory on the microSD card. Only music stored in this ring folder
can be used as Custom ringtones.
2. The ringtone name must be ring_1~ring_10.
3. The ringtone files must be in MP3 format.
14.2.1.5
Volume
Select “Volume” to adjust the ring volume of the monitor. Users can setup preferred ring
volumes for three different times of day. Ring durations can be adjusted from 10s to 45s.
Use
&
to navigate or increase and decrease value.
to enter.
[Volume1]:
The volume level of Ring Vol1 :01-10.
[Volume2]:
The volume level of Ring Vol2:01-10.
[Volume3]:
The volume level of Ring Vol3:01-10.
[Button Voice]:
This turns on/off the confirmation sound when a button is pressed.
14.2.2 DIGITAL PHOTO
In the main menu, select “Photo Frame” and press
to enter the Digital Photo Frame
page. If the “Photo Frame” is set to ON, photos in the \USER\Photo folder on the microSD
card will be displayed when in Standby mode. The photos must be in JPG format.
Note:
Motion detection will be disabled if the Digital Photo Frame setting is active.
[Photo Frame]:
Switches the digital photo frame mode ON or OFF. (Default is OFF)
[Play Time Interval]:
Sets the display interval from 0 to 10 seconds.
The default display time is 6 seconds.
22
23
