14.2.3 MODE SETTING
Select “Mode” and press
to enter the “Mode” menu. Can set extension number, DOOR2
status, unlock time, recording mode, motion detection, message etc.
[Set machine ID]:
Choose an ID number ranging from 01-06. An ID of “01” denotes the
Master Monitor. The other IDs (“02” to “06”) denote Slave Monitors.
[Door2 status]:
Enable or disable the preview of Door2.
[Door1 Unlock Time]:
Sets Door1 unlock time. After the unlock duration, Door1 will be
locked again. The unlock time can be set from 2 to 10 seconds.
The default value is 5 seconds.
[Door2 Unlock Time]:
Sets Door2 unlock time. After the unlock duration, Door2 will be
locked again. The unlock time can be set from 2 to 10 seconds.
The default value is 5 seconds.
[Record mode]:
Options for recording Video or taking Snapshots. For “Video”, when
the call button of a Door Station is pressed, the Indoor Monitor with the
MicroSD card will start recording video until the end of the call, or until
is pressed. For “Snapshot”, the monitor with the MicroSD card will
automatically snapshot a photo. More snapshots can be manually taken by
pressing
button.
Note:
Recording mode is only available for Door1, Door2.
[Motion Detection]:
Options include “Door1”, “Door2”, “CAM1”, “CAM2” and “Disable” .
[Message]:
Turn ON or OFF message reminder, default is ON. If a visitor calls, he/she will
be prompted to leave a message if the resident is not at home or fails
to answer the call.
14.2.4 ALARM
In Main Menu, move the cursor to the “Alarm” option. Then press
button to enter the
Alarm menu.
[Alarm Record]:
for recording Video or taking Snapshots. For “Video”, when an alarm is
triggered, the Indoor Monitor with the MicroSD card will automatically start
recording video from the related camera until the alarm clears, or until
is pressed. For “Snapshot”, when an alarm is triggered, the monitor with the
MicroSD card will automatically take a picture from the linked camera. More
snapshots can be manually taken by pressing
button.
[Sensor Type 1]:
Selects the CAM1 channel Sensor Type (see description below). When the
CAM1 sensor triggers an alarm, a video recording of CAM1 will start, or a
snapshot will be taken; depending on the selected recording mode.
[Sensor Type 2]:
Selects the CAM2 channel Sensor Type (see description below). When the
CAM2 sensor triggers an alarm, a video recording of CAM2 will start, or a
snapshot will be taken; depending on the selected recording mode.
[CAM1]:
Enable or disable the preview of camera1
[CAM2]:
Enable or disable the preview of camera2
Sensor Types:
NO:
“Normally Open”, When an ALM and GND terminals are shorted together,
an alarm will sound from the monitor.
NC:
“Normally Closed”, When an ALM and GND terminals are disconnected,
an alarm will sound from the monitor.
Disable:
If an external sensor is not used, set its Sensor Type to “Disabled”.
[CAM1 ring time]:
The alarm ringing time for Camera 1, after its sensor had detected an
alarm. Range from 0 - 20 seconds.
[CAM2 ring time]:
The alarm ringing time for Camera 2, after its sensor had detected an
alarm. Range from 0 - 20 seconds.
24
25
