Proxomed Kardiomed LC Скачать руководство пользователя страница 44

Страница: 44 / 81

page 44

cos105000-2016-00 en

Description

Illustration

Perform a functional check of all safety equipment:
5. Fall prevention
6. Pull cord safety stop
7. Emergency off button on UserTerminal
8. Further safety equipment

If there is any visible or assumed defects or malfunctions, unplug

device, exclude reconnection and call h/p/cosmos service

personnel.

Description

Illustration

When OIL message occurs, check the oil film on the running

belt. Do the same if there are dry grinding noises during

operation.

The OIL messages occurs every 1000 km by default.
The oil interval may be varied, depending on environmental

conditions and use.
Unplug the treadmill.

Move one hand / tissue for 1 m through the center between

running belt and running deck.

A slight film of oil must remain on the hand.
If the running belt is too dry, it must be lubricated.

For further and precise analysis a detailed instructions regarding the

tissue lubrication test are available at [email protected].

Fill the syringe with 10 ml of the lubricant (h/p/cosmos special

oil, only) and attach the tube to the syringe.

Pump the lubricant under the running belt very slowly and

remove the syringe.

11.3 Lubrication

Содержание Kardiomed LC


















































































Результаты поиска

Содержание Kardiomed LC

Отзывы:

Похожие инструкции для Kardiomed LC

Бренды по названию

Популярные бренды

Proxomed Kardiomed LC, Оригинальная инструкция

Результаты поиска

Содержание Kardiomed LC

Отзывы:

Похожие инструкции для Kardiomed LC

Бренды по названию

Популярные бренды