13
4
Storage, transport and installation
The devices are usually delivered completely assembled. In rare cases, it may be necessary to ship the
devices partially disassembled for transport reasons. In these cases, please use the corresponding
assembly instructions at the service [email protected] and follow the instructions given there!
Surroundings
●
only in dry rooms free of seawater air (>65% humidity).
●
Avoid temperatures below 5 °C and above 45 °C.
●
Avoid placing the units in heavily frequented rooms or near doors and
passageways.
Substrate
●
The load-bearing capacity of the substrate must be appropriate to the
weight of the device.
●
Level and impact-resistant surface that can withstand the load of the
device and the maximum permissible body weight of the user of 145 kg.
●
Small unevenness of the floor can be compensated for by means of the
adjustable feet which can be attached to the unit.
●
Or a level surface must be created by using suitable underlay material
made of shims or heavy-duty plastic.
●
The levelling materials should not be susceptible to rust.
●
When changing the position without dismantling the training device,
make sure that the device is standing securely on level ground.
●
For PVC floors: The rubber sheets can cause reactions with the PVC floor,
in this case use appropriate cork sheets.
Setting up the
device
●
Avoid hard, impact-like touching down of the devices.
●
Compensation of unevenness via adjustable feet, which can be adjusted
in height. Alignment with a spirit level.
●
Protect the devices from shocks, scratches and moisture.
