11
3.5
Indications and contraindications
The training benches are therapeutically effective for muscle weakness such as sarcopenia.
The devices are contraindicated and must not be used for the diseases listed below:
•
Febrile diseases
•
Current pain at rest or during activity as well as acute health complaints
•
Existing pain in the musculoskeletal system, e.g. after stretches, strains, torn muscle fibres,
sprains and intervertebral disc protrusions
•
Fresh fractures
•
Osteoporosis in continued stages (grade 2 and 3)
•
Hypertension in continued stages (grade 2 and 3 according to WHO)
•
Artificial joint replacement of the knee and/or hip joint with unstable anchorage
•
Severe neurological diseases with a tendency to muscle spasms
•
Abdominal wall or inguinal hernia
•
Pregnancy from the 2nd trimester
•
Heart failure and coronary heart disease. Patients with high blood pressure may only use the
device after consulting their doctor
3.6
Patient target group
The devices are intended for professional use in health care facilities, such as orthopedic and
physiotherapy departments in hospitals, rehabilitation clinics, etc. Depending on the indication, health
condition of the patient and treatment goal, the devices can be used in any phase of rehabilitation.
3.7
Clinical benefit
Compass MTT training benches support physiotherapeutic interventions. The clinical benefit for the
patient lies in the complementary use of the equipment and the resulting improved muscle stabilization.
3.8
Responsible operation
This user manual is intended for the operator and qualified personnel. All people working on the device
must be trained in its use and have read and understood the user manual including the safety chapter.
Staff must be informed before therapy begins and at regular intervals about the nature and extent of
the activities and about possible hazards, such as any warnings.
Instruction on the equipment (therapist, trainer, fitness trainer) and monitoring (therapist, sports
therapist, fitness trainer) may only be carried out by trained specialist personnel. Authorisation from the
operator is required.
Adjustments must not be operated under load. Before each adjustment, make sure that there is no load
from a lifted weight block. This can impair the permanent functionality of the components.
