ProVisual 16000AQH, Руководство пользователя

Страница: 3 / 141

3
Cautions

This product has free voltages (100V ~ 240V). See installation instructions before connecting to the power supply.

This product uses a Lithium battery.

To avoid any risk of explosion, do not replace the battery on the main board by anything other than a Lithium battery.

Dispose of used batteries according to the manuf
acturer’s instructions.

This equipment and all communication wirings are intended for indoor use only.

To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture.
WEEE (Waste Electrical and Electronic Equipment)
Important Safeguards
1. Read Instructions

To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture.
2. Retain Instructions

The safety and operating instructions should be retained for future reference.
3. Cleaning

Unplug this equipment from the wall outlet before cleaning it. Do not use liquid aerosol cleaners. Use a damp soft cloth for
cleaning.
4. Attachments

Never add any attachments and/or equipment without manufacturer approval as such additions may result in the risk of fire,
electric shock, or other personal injury.
5. Water and/or Moisture

Do not use this equipment near water or in contact with water.
6. Accessories

Do not place this equipment on an unstable cart, stand or table. The equipment may fall, causing serious injury to a child or
adult and serious damage to the equipment.

W
all or shelf mounting should follow the manufacturer’s instructions and should use a mounting kit approved by the
manufacturer.

Move this equipment and cart combination with care. Quick stops, excessive force and uneven surfaces may cause the
equipment and cart combination to overturn.
7. Power Sources

This equipment should be operated only from the type of power source indicated on the marking label. If not sure the type of
power, please consult to distributor or local power company.

UPS (Uninterruptible Power Supply) is highly recommended when the power input is not stable to protect DVR and HDD(s).
8. Power Cords

Operator or installer must remove power, BNC, alarm and other connections before moving the equipment.
9. Lightning

For added protection for this equipment during a lightning storm, or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the equipment due
to lightning and power-line surges.
10. Overloading

Do not overload wall outlets and extension cords to avoid the risk of fire or electric shock.
11. Objects and Liquids

Never push objects of any kind through openings of this equipment as they may touch dangerous voltage points or short out
parts that could result in a fire or electric shock.

Never spill liquid of any kind on the equipment.
Customers in European Union countries are advised to dispose this product, at the end of its
useful life, as per applicable local laws, regulations and procedures.