ProVisual 16000AQH Скачать руководство пользователя

Страница: 102 / 141

102



Date / Time format: Users can adjust and set the mode of date / time display in accordance with the location.

Date Format: select the date format among YYYY-MM-DD/MM-DD-YYYY/DD-MM-YYYY.

Time Format: select the time format between 24Hours/ 12 Hours AM/PM.



Display Font: Users can change the font of the name and display time of each channel.

Font Type: select the type of font between Arial and Courier.

Font Size: select the size of the font from 10 to 20 and the default is 15.

Color: select the color among 16 different colors.

6.4.2.3 Password Change



Please Click Password Change in setup menu to change the password. This ID and password is for opening the iCMS. This is

not related to any DVR

’s login password



Please select the ID from the drop down list and type original password.



Please type new password and confirm the password below.



If the information is filled out, click ‘OK’ to finish the Password change.

NOTE

This option will be applied after program restarts.

Содержание 16000AQH














































































































































Результаты поиска

Содержание 16000AQH

Отзывы:

Похожие инструкции для 16000AQH

Бренды по названию

Популярные бренды

ProVisual 16000AQH, Руководство пользователя

Результаты поиска

Содержание 16000AQH

Отзывы:

Похожие инструкции для 16000AQH

Бренды по названию

Популярные бренды