15
Low Battery Indicator
The front of the PCS-730B includes a red LED that will illuminate when the battery reaches
approximately 7.7 DC volts. It is important that you replace the battery when the LED is illuminated,
so that the meter is able to charge the plate assembly to at least 1000 volts.
Operation
The PCS-730B is personnel safe and easy to use. It should not be used in contact with electrostatic
discharge sensitive (ESDS) devices or assemblies.
1.
Install the charging wand (included) male banana snugly into the female receptacle located at
the front of the PCS-730B’s case.
2.
With the operator’s fingers contacting the grounding snap on the back of the meter, press the
green RANGE button switch to select the kV/inch range. The LED for kV/inch will be
illuminated.
3.
Hold a flat sheet of material in front of the meter’s sensing plate to confirm operation of the
ranging light system. A circle with a spot in the middle should appear clearly on the material
surface when held 1” (25mm) from the meter’s sensing plate.
Figure 6.
Battery Replacement (PCS-730B)
