Prostat CPM-720B, Руководство пользователя

Страница: 2 / 26

1
Warning! Important Safety Information
Please read the Safety Instructions before using your Meter.
Refer to the table below for an explanation of symbols which may be on your Prostat product.
In this manual, a Warning identifies conditions and actions that pose hazards to the user. A Caution
identifies conditions and actions that may damage the Meter or the equipment under test.
The Meter complies with:

ANSI/ESD S3.1

ANSI/ESD SP3.3

ESD TR53

ANSI/ESD S20.20
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). THERE ARE NO
USER SERVICEABLE PARTS INSIDE. REFER ALL
SERVICING TO QUALIFIED PERSONNEL.
AC voltage: Rated voltage marked
with this symbol is AC voltage.
This symbol indicates that high
voltage is present inside. It is
dangerous to make any kind of
contact with any internal part of
this product.
DC voltage: Rated voltage marked
with this symbol is DC voltage.
This symbol indicates that this
product has included important
literature concerning operation
and maintenance. Caution. Consult instructions for
use: This symbol instructs the user
to consult the user manual for
further safety related information.
This symbol indicates earth
ground.
This symbol represents capacitance.

This apparatus uses batteries. In your community, there might be environmental regulations that
require you to dispose of these batteries properly. Please contact your local authorities for
disposal or recycling information.

Never insert anything metallic into the open parts of this apparatus. This may cause a danger of
electric shock.

To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician
should open this apparatus.

Do not drop or strike the product. If the product is damaged, contact a Prostat Authorized Service
Center.

This apparatus may produce voltages which may damage some electronic components. Remove
any such components from vicinity before operating this apparatus.

This apparatus uses LED’s to indicate proper distance of measurement. Do not point ranging lights
into anyone’s eyes.